User manual

- 73-
Ref#90020326K0709
2.) Then type in the name of the person, email and the message.
3.) Once a message has been set it will look like the picture below.
Go to Device
So if for some reason, you need to connect to the device directly to modify some of the settings on your IP
Kamera. You can use the go to device button to directly open a internet browser and go to the camera.
To do this follow the following instructions:.
1.) Right click on the device that you would like to connect to and select go to device.
2.) Then enter the correct login and password into the internet browser to connect to the device.