User manual

- 61-
Ref#90020326K0709
Snapshot Command:
The snapshot command takes a snapshot of the camera in the current view.
http://ipaddress:port/snapshot.cgi
Ex. http command:
Hhttp://192.168.100.50:85/snapshot.cgi
Change Name:
This command changes the name of the IP Kamera 9070IR
http://ipaddress:port/vb.htm?cameratitle=name
Ex. http command:
Hhttp://192.168.1.192/vb.htm?cameratitle=test_9070IR11
Change IP Address:
This command changes the IP Address of the IP Kamera 9070IR
http://ipaddress:port/vb.htm?internetip=ipaddress
Ex. http command:
Hhttp://192.168.1.192/vb.htm?internetip=192.168.1.191
Change Port:
This command changes the Port of the IP Kamera 9070IR
http://ipaddress:port/vb.htm?httpport=portnumber
Ex. http command:
http://192.168.1.192/vb.htm?httpport=1025
65BChange Subnet Mask:
This command changes the Subnet Mask of the IP Kamera 9070IR
http://ipaddress:port/vb.htm?subnetmask=subnetmask
Ex. http command
Hhttp://192.168.1.192/vb.htm?subnetmask=255.255.0.0
Note: Default subnet mask is 255.255.0.0
Change Gateway:
This command changes the gateway the IP Kamera 9070IR.
http://ipaddress:port/vb.htm?gateway=gatewayaddress
Ex. http command
Hhttp://192.168.1.192/vb.htm?gateway=192.168.1.1
Change DNS:
This command changes the gateway the IP Kamera 9070IR.