User manual

- 28-
Ref#90020326K0709
Tune Image
The tune image settings section allows you to control and tune the picture quality of the image. Keep in mind,
the quality of the picture will also be affected by the quality of the lens that is being used.
White Balance: Select from the following options auto, indoor, or outdoor
Day and Night: Select the mode Day or Night
TV Output: Select the mode enable or disable to output to a T.V
Binning / Skipping mode: Binning enables low light-light performance. Select Binning, Skipping, 4x Binning
mode (default is Binning)
BLC (Backlight control): Select from one of the options on or off to control the
Backlight: Select a value between (0~100%)
Brightness: Select a value between (0~100%)
Contrast: Select a value between (0~100%)
Saturation: Select a value between (0~100%)
Sharpness: Select a value between (0~100%)
Default: To Return all values to normal default click on this button.
Note: Make sure you click on the Apply button to save any changes made
Note: PTZ is only available in the mode below. When you enable PTZ it will automatically
jump into that mode.