User manual

- 23-
Ref#90020326K0709
Motion Detection
Motion Detection: The motion detection icon will display when motion has been detected. This setting must
be activated in the application section
Motion Inactive - When motion detection is inactive
Motion Activated - When motion detection is activated, the icon will turn blue
Active Record
Active Record: Active record will show up when the device is actively recording. Active recording functions
like motion detection, scheduler, or an alarm will set off this automatic recording.
Active Record Inactive - When active recording is not activated it will look like the picture below
Active Record Activated - When the active recording function is activated it will light up in red.
Snapshot
Snapshot: The snapshot function, creates a easy way take pictures of the current view in the IP Kamera
9070IRIR.
To setup the snapshot destination folder:
1.) Click on the Application link on the bottom menu
2.) Then select Snapshot path
3.) In here browse for the location where snapshot pictures will be stored. By default the snapshot path
will be in C:\9070IR\