User manual

- 18-
Ref#90020326K0709
Static IP Setup
Static IP Address provided by the ISP.
In this case, the 9070IR-PoE is being connected to the internet through a hub, which is different
from a router. The hub does not provide DHCP, and therefore would require that this setup have
a static IP Address that is provided by the ISP.
Contact the ISP to find out the static IP address so that your device can be accessed through the
internet. Once a Static IP has been assigned the device will be able to automatically go onto the
internet.
6.) Web Interface
Connecting to the 9070IR-PoE
Once the 9070IR-PoE has been setup correctly, connect to the login page.
An Internet Explorer browser screen pop up with the login screen.
Default IP: 192.168.1.168 (When 9070 is connected to PC directly)
Default Login: Admin
Default Password: 12345678
1.) Once you have logged into the device you will be required to install active x controls.