User manual

- 11-
Ref#90020326K0709
If no DHCP server is available you must manually set the IP address to match your
networks settings. Please see the custom setup page below more details on how to
manually set your device.
3.) Simply double click on your device in the local device section and a internet explorer
window will appear, and start connecting to your device.
All devices will need to be on the same network if not the device cannot be accessed and will not be
detected.
Custom Setup (Manual Setup)
When no DHCP is found on the device, the 9070IR will be given a static IP Address.
Default IP: 192.168.1.168 (When 9070IR is connected to PC directly)
Default Login: admin
Default Password: 12345678
1.) Highlight the 9070IR device in the local devices section of IP Edit. On the right side of IP
Edit all network information of the device will be displayed.
If the device is not on the same network a Red Exclamation mark
will appear in the IP
Network information section