User manual

MJPEG Streaming
This command allows you to integrate streaming data into a software, website, or any other application.
http://ipaddress:port/ipcam/mjpeg.cgi
Ex. http command
http://192.168.1.192/ipcam/mjpeg.cgi
8.) Using RTSP with VLC
Before Setting up VLC: Make sure that the 9070 is set to be the DMZ host on the router
that you are using, please refer to the routers manual on how to accomplish this.
How to setup VLC media player & Open a network stream
1.) Open VLC media Player
2.) Click on Tools > Preference
3.) Click on the Reset Preferences
4.) On the bottom left hand side of VLC select the all under the show settings area.
5.) Then in the left panel select the video option
and check in the box that
says “Overlay video output”
6.) Then on the left panel select Input / Codecs > Demuxers > RTP/RTSP.
- 47-
Ref#90020326K0709