User manual

- 25-
Ref#90020326K0709
Color System: Select the broadcasting color system that pertains to your country.
TSC/60Hz
ate Control: Select the Bit Rate Control that fits your needs.
VBR: Constrained Variable Bit Rate
-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below
M-JPEG Quality Settings
N
PAL/50Hz
R
C
CBR: Constant Bit Rate
M
High
Medium
Low
PEG4-1
e: Select a value from 64~8000.
.5fps
PEG4-2
e: Select a value from 64~8000.
nable EPTZ: The EPTZ on the IP Kamera 9070 a virtual EPTZ function. This function allows the
o use the EPTZ mode:
ion and then hit the submit button.
M
Bit Rat
FPS: Select a FPS from 30fps, 15fps, or 7
M
Bit Rat
FPS: Select a FPS from 15fps or 7.5fps
E
user to control the video on the Live Video mode by moving left or right, zooming in and zooming
out.
T
1.) Enable the EPTZ funct
2.) Click on Live Video Mode
3.) Click on EPTZ-Set and a new control window will pop out.
rom here you can control the live videos Zoom Function and direction.
lso once EPTZ is enabled, in the Live View Screen buttons will appear on the bottom for you to
M-JPEG Frame Rate Settings
F
A
pan, tilt, and zoom.
30 FPS
15 FPS
7.5 FPS
3 FPS
1 FPS
Note: PTZ is only available in the mode below. When you enable PTZ it will automatically
jump into that mode.