User manual

4.) Then hit the rescan button on IPEdit to confirm the changes have been made.
IP Service
How to use IP Service on IPEdit:
IP service allows the user to directly connect to his / her device through the internet without having to
remember long confusing IP Address. Instead you only need to remember the name of the device that the
you have selected. Then the user can connect to IP Service, type in the device name, and connect directly
to the device.
Note: The IP Kamera 9070 requires you to select Server 2 on IP Service
1.) Open IPEdit, the device will show up in the Local Device Section. If you have not selected a name
for the device, please refer to the section on the manual labeled: “Naming your device”.
2.) To start IP Service, Hit the green connect button on the top of IPEdit.
3.) Once you have been connected search for your device by typing in at least the first 3 letters that you
named your device with. Then hit the search button.
- 15-
Ref#90020326K0709