User manual

- 64-
Ref#90020326K0709
3.) On the bottom of the screen click the Reset preference button.
4.) On the bottom left hand side of VLC select the all under the show settings area.
5.) Then in the left panel select Input / Codecs > Demuxers > RTP/RTSPl and type in the RTSP user
name and RTSP password.
6.) Check the Cache value. For low latency, it should be 70~80 based on PC’s performance.
Note: If the video is not smooth, set the caching value from 150~1200. This problem could be due to too
much congestion, busy pc, and etc.
7.) Save the new settings
8.) Then go back to the VLC media player and go to Media > Advance Open File
9.) Next select the network tab and under the protocol select RTSP.