User manual

- 63-
Ref#90020326K0709
http://ipaddress:port/vb.htm?subnetmask=subnetmask
Ex. http command
http://192.168.1.192/vb.htm?subnetmask=255.255.0.0
Note: Default subnet mask is 255.255.0.0
Change Gateway:
This command allows you to change the gateway the IP Kamera 9070-IRW.
http://ipaddress:port/vb.htm?gateway=gatewayaddress
Ex. http command
http://192.168.1.192/vb.htm?gateway=192.168.1.1
Change DNS:
This command allows you to change the gateway the IP Kamera 9070-IRW.
http://ipaddress:port/vb.htm?dnsip=dnsipaddress
Ex. http command
http://192.168.1.192/vb.htm?dnsip=168.95.1.1
MJPEG Streaming
This command allows you to integrate streaming data into a software, website, or any other application.
http://ipaddress:port/ipcam/mjpeg.cgi
Ex. http command
http://192.168.1.192/ipcam/mjpeg.cgi
8.) Using RTSP with VLC
Before Setting up VLC: Make sure that the 9070-IRW is set to be the DMZ host on the router that you are
using, please refer to the routers manual on how to accomplish this.
How to setup VLC media player & Open a network stream
Real Time Streaming Protocol (RTSP) gives the device another way to stream live video. Using programs
that support RTSP, you can broadcast the videos from the 9070 live.
Note: To access the device from outside the network. Please make sure of the following:
9070-IRW should be set to DMZ host,
or mapping router's TCP ports 554 and 8554 to 9070-IRW, preferably at the same time mapping UDP
port 6970-9999
1.) Open VLC media Player
2.) Click on Tools > Preference