User manual

- 32-
Ref#90020326K0709
Day and Night: Select the mode Day or Night
TV Output: Select the mode enable or disable to output to a T.V
Binning / Skipping mode: Binning enables low light-light performance. Select Binning, Skipping, 4x Binning
mode (default is Binning)
BLC (Backlight control): Select from one of the options on or off to control the
Backlight: Select a value between (0~100%)
Brightness: Select a value between (0~100%)
Contrast: Select a value between (0~100%)
Saturation: Select a value between (0~100%)
Sharpness: Select a value between (0~100%)
Default: To Return all values to normal default click on this button.
Note: Make sure you click on the Apply button to save any changes made
Network
The Network settings section allows the user to setup their network information for the IP Kamera.
Network
The network section allows you to setup the network information for the IP Kamera 9070-IRW.
Enable DHCP: This function will enable the DHCP for the 9070-IRW. If this is enabled the IP Address of the
device will be automatically provided by the router of the device.
IP Address: The IP Address will be displayed here. To change the IP Address of the device simply change
the values and hit submit.
Subnet Mask: Subnet Mask information. By default it is set to 255.255.255.0
Default Gateway: The default gateway address is the address to connect to the router.
DNS Server: Domain Name System Address
Http Port: Enter the port that you would like the 9070-IRW to connect on.
MAC: The Mac Address or physical address of the device
Note: Make sure you click on the Apply button to save any changes made