User manual

- 31-
Ref#90020326K0709
Cable / ADSL: Most high speed internet users today use Cable / ADSL as the main internet provider line.
Fiber Optics: High speed fiber optics provides the best solution for outside the network because it is very
fast.
Intranet (LAN): When using the IP Kamera from within the network this is the best option.
Custom: This setting allows you to manually input a setting for the Bit Rate, FPS, and picture quality.
M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below
M-JPEG Quality Settings
High
Medium
Low
MPEG4-1
Bit Rate: Select a value from 64~8000.
FPS: Select a FPS from 30fps, 15fps, or 7.5fps
MPEG4-2
Bit Rate: Select a value from 64~8000.
FPS: Select a FPS from 15fps or 7.5fps
Tune Image
The tune image settings section allows you to control and tune the picture quality of the image. Keep in mind,
the quality of the picture will also be affected by the quality of the lens that is being used.
White Balance: Select from the following options auto, indoor, or outdoor
M-JPEG Frame Rate Settings
30 FPS
15 FPS
7.5 FPS
3 FPS
1 FPS
Note: PTZ is only available in the mode below. When you enable PTZ it will automatically
jump into that mode.