User manual

- 10-
Ref#90020326K0709
3.) Simply double click on your device in the local device section and a internet explorer window will appear,
and start connecting to your device.
All devices will need to be on the same network if not the device cannot be accessed and will not be
detected.
Custom Setup (Manual Setup)
Note: If no DHCP is found on the device, the 9070IRW will be given a static IP Address.
Default IP: 192.168.1.168 (When 9070IRW is connected to PC directly)
Default Login: admin
Default Password: 12345678
1.) Highlight the 9070IRW device in the local devices section of IP Edit. On the right side of IP Edit all
network information of the device will be displayed.
Red Exclamation mark
will appear in the IP Network information section iff the device is not on the same
network
2.) To setup the device, you will need type in the correct Gateway and IP Address.
The Gateway Address: The gateway address can be obtained in Windows under the network
connections page