User manual

- 19-
Ref#90020326K0709
8.) Unplug the RJ45 cable of the device and search on IPEdit for the new wireless
settings. You will see a (W) next to your device in IPEdit which means wireless is
activated. If the RJ45 cable is not disconnect you will see two IP Address on the
device.
Advance Setup:
Click on the On Link under advance section
Click on the Site Survey Link then select the wireless internet network that you would
like to connect to and hit the add profile button to add a new profile
A new window pop and you will be required to enter the necessary network information
including the passphrase or password for the wireless internet.