IP Kamera 9000A Plus User Guide
IP KAMERA 9000A PLUS USER MANUAL User Guide IP Kamera 9000A Manual version: 2.32 Date: SEP 20, 2004 -1- VER. 2.
Caution: Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for FCC and CE. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in commercial environment. Important Notice 1. IP Kamera 9000A is for indoor use.
IP KAMERA 9000A PLUS USER MANUAL Table of Contents 1. PRODUCT OVERVIEW............................................................................................... 4 FEATURES ...................................................................................................... 2. PHYSICAL DESCRIPTION ......................................................................................... 5 SPECIFICATION ...................................................................................................
1. Product Overview IP Kamera 9000A is an IP camera that has a digital web server in camera. This camera can put up live image on-line and make remote locations immediately accessible through standard web browsers. IP Kamera 9000A is equipped with cutting edge technology, includes a digital camera, web server, and optimized hardware for image compression, and physical Ethernet connection.
IP KAMERA 9000A PLUS USER MANUAL 2. Physical Description BOX CONTENT IP Kamera package content： ! 1 x IP Kamera 9000A ! 1 x Tripot ! 1 x RJ 45 internet line ! 1 x DC Power adopter 5V, 110 ~ 240. ! 1 x CD (a. IP KAMVID program b.
3. Panel Description Front Panel: 1. Power indicator (blue LED) 2. Lens (CMOS) Back Panel: from left to right: 1. Reset Button 2. DC Power - 5V 3. On / Off 4. RJ 45 5. Microphone In Note: The Microphone Input support only audio from microphone. If input audio from other audio device, the audio volume would be noise or over volume.
IP KAMERA 9000A PLUS USER MANUAL 4. Installation Before using IP Kamera 9000A, follow bellow: Before installation: Reconfirm your package content A Hub Electricity 110 ~ 240 V Hardware installation 1. Plug in IP Kamera 9000A (Power) 2. Plug in RJ 45 line to a HUB 3. Connect the other way to the computer 4. Connect your Hub into your modem 5. Turn you computer on -7- VER. 2.
SOFTWARE INSTALLER 1. IP_ KAM VID_ 1070 After connecting the power and RJ 45 line, following the steps below to install the software. Step 1: Install IP KAM by executes Setup.exe in the CD; choose setup language and the install shield Wizard will help finish the program.
IP KAMERA 9000A PLUS USER MANUAL Step 2: Then you can see shortcut icon “IP KamVid 1070 “on desktop, click this icon. Note: Be sure that the power is turn on and the RJ45 line is properly connected. Step 3: The KIPEDIT program will detect all the active IP9000s or IP9100s in the same local Ethernet, and display the findings in the window. -9- VER. 2.
Step 4: Click the one you want to set, its name, IP will be displayed below. You can change its name (please use numbers or letter) or IP (please set in the same subnet as your PC) in the text windows. Then click Update. After about 20 seconds, the new setting will work. Step 5: Double click the picture in the window of KIPEdit or type the IP address in the IE browser, you can open the web page of IP9000A. If you cannot open the web page of IP9000A, be sure that you have installed IE 6.
IP KAMERA 9000A PLUS USER MANUAL 3. For those not totally compatible with VFM, such as QQ and POPO, you should click remove device button first, then click install VFM device, then you can get the captured images from IP9000A. Work with Yahoo /MSN Messenger 1. Work with Yahoo /MSN Messenger: We use Yahoo for instance. Select the friend you would like to send your video. For instance, we pick up YahooHelper. 2. Choose Webcam then system will ask your Internet connecting speed. 3.
4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm by click “Add” and choose if reverse the out streaming video. We support A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180 If the video is upside down, you can choose D to get rotate video. And also adjust the video color ; Brightness, contrast, Hue, Saturation, Sharpness Note 1 : for safety issue , as transfer video by Yahoo /MSN, only Administrator can do the video streaming.
IP KAMERA 9000A PLUS USER MANUAL 5. Network Set up From our Network set up, users can view live video from any where in the world, with just a computer. Click on Network set up: this area is authorized by administrator only. 1. Still IP: Provided by ISP, with this IP you can connect this address from any where in the world. - 13 - VER. 2.
1-1 : Using Still IP: list your still IP address 1-2 : Choose “Reboot immediately”. Please close your browser and reboot again and type in your IP address once again. If using DHCP, please choose‘ Automatically by DHCP” *And please use KIPEdit program (Find users exact IP) that’s included in the CD ROM 2. DHCP setup- ADSL / xDSL: ISP will provide your exact IP address, please enter your Username and password for your provider.
IP KAMERA 9000A PLUS USER MANUAL 6. Functions Please refer to all the function on the left side of IP Kamera 9000A AP; most of its configuration can only be use by Administrator. Functions: 1.IP address: Show select IP address. 2. Change Password. 3. Kamera Control: Picture Quality - Low, High, Medium, Clarity& Motion (Resolution) - 640*480,352*288,320*240,176*144,162*120 Frequency – Indoor 50, Indoor 60 & Outdoor 3-1.Picture Quality: 3-2.
4. Image (Split) - 1x1, 2x2, 3x3, and 4x4. Splits – Show same video in multiscreen – 1*1, 2*2, 3*3, 4*4 Note – split image are focus into a single image. 4 Video 5. Operation Mode: Continues mode: Video will display continues Period – Video will refresh 1 - 60 per millisecond or per second 6.
IP KAMERA 9000A PLUS USER MANUAL 7. Configuration: System User Motion Detection Network Audio DDNS 7-1 System Set up 7-1-1 : Camera name, time and date setup Note: maximum 18 English characyters - 17 - VER. 2.
7-1—2 : Setup Http port 7-1-3 : Reset: 7-1-4 : Restart IP Kamera 9000A 7-1-5 : Renew its position 7-2 User Management: Can choose user authorization require optional Choose if viewers need a password or not. Yes - Viewers needs a password No - Open to all viewer who logs in to users IP 7-2-2: Add user by adding a username and a password and you can add a current users list. 7-2-3: You can also delete a user by selecting its name and press delete.
IP KAMERA 9000A PLUS USER MANUAL 7-3: Motion detection: when motion detection is triggered, it will automatically send video or image to user E-mail or FTP site. 7-3-1: Choose motion detection: Disable : No motion detection Enable: choose – low / mid / high 7-3-1-1: Motion Detection Setup: Fill in sender mail and receiver mail. 7-3-1-2: When send to FTP, please fill in its FTP server address, user name, password, account and upload path, and click on Upload images when motion detected.
7-4 Network setting : Please refer in page 13 7-5 . Audio : You can control audio on /off at Server or Client . 7-6 DDNS : Please refer in Page ? 8. Right click function: When right click mouse, it can also use: - View Splits Rotate Resolution Image Recording Save picture 8-1 View - Resizable: adjust screen size. - Actual size: default to original size. - Status Bar: show ip address, and screen size.
IP KAMERA 9000A PLUS USER MANUAL 8-2 Split - 1x1, 2x2, 3x3, 4x4 8-3 Rotate - Rotate 0 - Rotate 180 - Flip Horizontal - Flip Vertical Rotate 0 Rotate 180 8-4 Resolution - 640x480, 320X240, 352X288, 176X144, 160*120 - 21 - VER. 2.
8-5 Quality : Low High Medium Clarity Motion 8-6 Image Recording - Record images to JPEG and AVI file. Both files can be recorded in the same time. JPEG: can select how many pictures taken and time frame. 8-6-1 Recording AVI - Select save as AVI, and then select the maximum number of frame in each file. Note: If select No limit, it will continue recording until it used up all memory space. 8-7 Save current picture as - Take a snap shot on current images showed on IP Kamera AP.
IP KAMERA 9000A PLUS USER MANUAL 9. Dynamic DNS (DDNS) When the IP9000A dial up to the Internet network, your IP provided by your ISP is random. So the user may difficult to find your IP9000A because the ip is changing at every time it dial up. The Dynamic DNS service is provided by www.DynDNS.org for free. First, user can logon the www.DynDNS.
7. Other Functions 1. IP Kamera 9000A can view 9 different IP at the same time. ８. Authorization In IP Kamera 9000A factory set up: factory setting Username: administrator Password: 1234 *Is recommended to change its factory setting password and user name 1. Administrator: Change Password: Camera Control: (Quality) - Low, High, Medium, Clarity, Motion (Resolution) - 640*480, 352*288, 320*240, 176*144, 160*120 (Frequency) Outdoor, Indoor &50, Indoor&60 (Split) - 1x1, 2x2, 3x3 and 4x4.
IP KAMERA 9000A PLUS USER MANUAL .基1-1 Adding camera A. Add in another IP address Please add in a different IP in “ Watching and press enter” Note1: please type in http:// before your IP. Note2: when selecting different views, it will show different IP addresses in Watching. B. Press “ADD” to increase other IP address. The maximum quantities of IP are depending on your PC system. If use P3 system, the maximum is 9pcs IP. C.
2-1 USER: - When non-administrator entered ip addresses to view its AP, it will ask for a user ID and PASSWORD. 2-2 - Users entered IP Kamera 9000’s AP, it will automatically request for Administrator’s Password. If user or other visitors don’t have the rights to use Administrator authorization password, press, “CANCEL” to ignore the inquiry.
IP KAMERA 9000A PLUS USER MANUAL Q 3: The Image recording cannot stop immediately? A 3: If your IP is virtual IP, than it will not be happened. If your IP is true IP (EX: PPPoE or FIX IP….), than it might be happened. You need to wait for a second and it will be return to normal. - 27 - VER. 2.
