KingTwin 1700 (PNF) Full Instruction Manual

We have designed a no fuss & an easy way to attach the wing panel by using a multi-link

connector and a unique plastic mount which securely connects everything together at the same

time.

11. Align the wing joiners to the set of tubes which are pre-installed in the mid-wing.

Slide the outer wing

panel all the way in until you hear a “click” sound from the plastic clip underneath the wing. This

“click” means that the outer wing panel has been attached securely to the mid wing. Note: It’s

always good to do a safety check. To ensure the installation

is secure before flight, try to pull the

mid-wing panel and one of the outer panels apart with both hands. If the lock is solid then you are

safe to fly. Otherwise repeat the above steps until it is securely locked in place.

OUTER WING PANEL INSTALLATION