(PNF) C-130 V2 Civilian & US Coast Guard Full Instruction Manual

7. Install the vertical stabilizer spigots into the corresponding

slots in the rear of the fuselage assembly.

8. Ensure the vertical stabilizer is fully seated into the slots in

the fuselage assembly.

9. Use the supplied 3mm x 20mm, and 3mm x 25mm screws to lock the

vertical stabilizer to the fuselage assembly. Please note: The longer

3mm x 25mm screw should be installed at the front, just behind the

cargo bay door as shown above..

3mm x 25mm

3mm x 20mm