(PNF) Extra 330LX V2 Instruction Manual

Make sure the center of gravity(CG) is as indicated in the following diagram.

CG Location:

120mm from leading edge for

classic style flying.

125/130mm for 3D flying

For a classic set-up, use the inner holes on the servo arms.

For Max 3D set-up, use the outer holes on the servo arms.

Ailerons: 45mm up/down for classic aerobatics

70mm max up/down for 3D flying

Rudder: 65mm left/right for classic aerobatics

135mm max left/right for 3D flying

Elevator: 40mm up/down for classic aerobatics

80mm max up/down for 3D flying

CG 120/130mm when measured from

the leading edge of the wing at the root.

Measure with the model inverted