Avios Extra 330LX V2 1420mm (56") EPO Instruction Manual
AVIOS AVIOS AVIOS Hobby King 1
CONTENTS SPECIFICATIONS 03 FEATURES 03 BOX CONTENTS 03 ASSEMBLY 04-05 CONTROL HORN AND SERVO ARM SETTINGS 06 CG LOCATION 07 CLEVIS INSTALLATION 07 CONTROL SURFACE CENTERING 07 THROTTLE RANGE SETTING 08 CONTROL DIRECTION TEST 09 ACCESSORIES 10 TROUBLE SHOOTING 11 MODEL FLYING PRECAUTIONS 12 PRE-FLIGHT CHECKS 12 OPTIONAL 5S SET-UP 13 2
SPECIFICATIONS: 1. 2. 3. 4. 5. 6.
Assembly: 1 2 PM 3x15mm 3pcs PA 2.
Assembly: 7 8 PA 2x12mm 2pcs 10 Gl ue 9 Exhaust Stacks PWA 2x8mm 2pcs Assembly of your Avios Extra 330LX is now complete. At this point please make a final check of all components, screws, and nuts and bolts to ensure they are secure and firmly in place.
Control Horn and SERVO ARM SETTINGS: Below shows the recommended positions on the servo and control horns for the pushrods and clevises. Fly these recommended settings before making any changes. After flying you may choose to adjust the linkage positions and throws to achieve your desired control response. Further down are some recommendations from Tom De Weerdt.
For a classic set-up, use the inner holes on the servo arms. For Max 3D set-up, use the outer holes on the servo arms. Ailerons: 45mm up/down for classic aerobatics 70mm max up/down for 3D flying CG Location: Elevator: 40mm up/down for classic aerobatics 80mm max up/down for 3D flying Rudder: 65mm left/right for classic aerobatics 135mm max left/right for 3D flying Make sure the center of gravity(CG) is as indicated in the following diagram. 120mm from leading edge for classic style flying.
Throttle range setting 8
Control directions tests: Assemble the aircraft and bind your transmitter to the receiver before performing this test. After binding a transmitter to the aircraft receiver, set the trims and sub-trims to 0, then adjust the clevises to center the control surfaces. Move the controls on the transmitter to make sure the aircraft control surfaces move in the proper direction.
Accessories: Fuselage Left Wing SKU: 9306000518-0 SKU: 9306000519-0 Horizontal Stabilizer Vertical Stabilizer SKU: 9306000521-0 SKU: 9306000522-0 Main Wing Spar 14x7 Wood Propeller SKU: 9306000524-0 Main Landing Gear SKU: 9306000527-0 SKU: 9306000525-0 Tail Wheel Assembly SKU: 9306000528-0 10 Right Wing SKU: 9306000520-0 Side Force Generators SKU: 9306000523-0 Spinner SKU: 9306000526-0
Trouble shooting: 11
Model Flying Precautions: Pre-flight checks 12
Optional 5S Set-Up Want some extra power to practice modern day extreme aerobatics? Then upgrade to either a 70 or 80amp ESC, plug in a 5S LiPo, and you are ready to have some extreme fun. You will notice straightaway you have loads of extra speed, but more importantly you'll be able to use that extra pull out power, and throttle control during your manouevres.This added power will make your poptops, rifle rolls, and all the extreme 3D moves that much more aggressive.
