Owner's manual

Pr o 64 Ne t w o r k Ma N a g e r Us e r gU i d e

Control Groups

For remote‑controllable devices capable of belonging to a Control Group (6416m, AllFrame, RCI, and the

6416Y2 card when m‑control™ is active), the Control Group drop down menu will appear in the Device

Window. Select a Control Group from the drop down menu to change the Control Group for the device

currently being edited; available settings are Control Groups 1‑4 and 'Off.'

Control Group can be set to one of the four groups or 'o.'

P No t e : The 6416Y2 A‑Net Interface Card is always assigned to one of the four Control Groups when

m‑control is in use and has no 'off' setting available.

A device must be assigned to a Control Group to send or receive remote control information.