Owner's manual
56
Pr o 64 Ne t w o r k Ma N a g e r Us e r gU i d e
The following Pro64 devices have no Edit Lock control on their front panel interfaces and cannot be
locked:
• 6416Y2 A‑Net Interface Card for Yamaha®
• AllFrame
• MH10 and MH10f Merger Hubs
• ASI A‑Net Systems Interface
• RCI Remote Control Interface
Device Column
The Device column lists all Pro64 devices in the network by type. Numbers can be appended to the device
type when multiple devices of the same type are part of a network (6416m #1, 6416m #2, etc.) by changing
the device’s Numeric ID. Click the column heading to sort devices by type.
Numeric ID
Each Pro64 device in a network can be identified with a number (up to 3 digits). This unique ID is stored
in the hardware itself and can only be changed from the Pro64 Network Manager application. When new
Pro64 devices are added to a network they do not have a Numeric ID associated with them. In the Network
Overview and Device Windows they are displayed as (New Device).
Devices without Numeric IDs are identied as New Device
To set (or change) a Numeric ID for a Pro64 device, select a device (6416m, 6416o, etc.) in the Network
Overview and choose eD I t Nu m e r I c ID... from the Device menu or right‑click on the row and choose the
eD I t Nu m e r I c ID... command from the contextual menu.
Right-click to access the Numeric ID menu item