Owner's manual

49
Pr o 64 Ne t w o r k Ma N a g e r Us e r gU i d e
Workspace Menu Commands
The menu commands found in the main workspace are described below.
Workspace menus
File Menu
The File menu offers the following commands:
New Project Opens a dialog box that allows you to navigate to a folder on your hard
disk and choose a storage location and name for a new project. The
new project is based on the current network configuration. All channels
are deactivated and channel parameters are set to factory default
conditions. Scenes and Device Presets are cleared. (shortcut ‑ Ctrl+N)
Open Project Opens a dialog box that allows you to navigate to a folder on your hard
disk and choose a project to be opened
(shortcut ‑ Ctrl+O)
Save Project Saves the current project (shortcut ‑ Ctrl+S)
Save Project As... Opens the Save dialog to allow you to save a copy of the current project
with a different name (shortcut ‑ Ctrl+Shift+S)
Close Project Closes the current project; leaves the workspace open
Exit Quits the Pro64 Network Manager application (shortcut ‑ Alt+F4)
Network Menu
The Network menu commands control online/offline status.
Work Online... Opens a dialog box that allows you to connect to a Pro64 network. Open
projects are checked for compatibility with the online network.
Work Offline... When connected to a Pro64 network that is being managed online, this
command breaks the communication connection between the PC and
the Pro64 hardware allowing you to make edits without being physically
connected to the network.
Mute All Use the Mute All command to temporarily mute all audio outputs. A red
“Mute All” is shown in the workspace status bar while the outputs are
muted. Repeat the command to return to normal operation.
(shortcut ‑ Ctrl+Shift+1)
This item is not available when working offline.