Owner's manual

138
Pr o 64 Ne t w o r k Ma N a g e r Us e r gU i d e
aP P e N d i x
RS-232 Cables and Pinout
Using an RS‑232 device with a Pro64 device requires a female‑to‑female DB9 null modem cable (also
referred to as a crossover cable).
The RS‑232 jack found in the VDC section of a Pro64 device has the following pinout.
1 2 3 4 5
6 7 8 9
DB9 connector pinout on a Pro64 device
RS-232 Connections
The table below describes the pinout for the RS‑232 connectors found on Pro64 devices.
Pin Signal
1 Data Carrier Detect *
2 Received Data
3 Transmitted Data
4 Data Terminal Ready *
5 Signal Ground
6 Data Set Ready *
7 Request To Send *
8 Clear To Send *
9 Ring Indicator *
* Not supported, no connect