Owner's manual
114
Pr o 64 Ne t w o r k Ma N a g e r Us e r gU i d e
Updating a Device Preset
Once a Device Preset has been saved you can change its settings, rename it, and update it as often as
needed. To update one of the 16 Device Presets with a newer version, select the preset in the Device Preset
panel to highlight it, rename it if necessary, and then click the sA v e button in the Device Preset panel. You
will be prompted to confirm the change before the preset is overwritten.
Conrm the change to an existing preset.
To change only the preset’s name, click the preset’s name field, select and enter any text to be changed,
then press the keyboard eN t e r key. Confirm the update in the dialog box that appears by clicking Ye s .
Recalling a Device Preset
To recall a Device Preset that has been saved with the project, first select the preset to highlight it and then
click the re c A l l button in the Device Preset panel.
For input modules, if there are any Slot activation conflicts caused by the Device Preset recall, a warning
dialog will alert you to the conflict.
Conict warning
Remember that only one input channel can occupy a network Slot at a time.
Clearing a Device Preset
To remove a Device Preset from the preset panel (which also removes it from the project and from disk),
first select the preset to highlight it and then click the cl e A r button in the Device Preset panel.
Clearing a preset requires conrmation.
Confirm the operation by clicking the Ye s button. There is no undo. for this action