Owner's manual

112
Pr o 64 Ne t w o r k Ma N a g e r Us e r gU i d e
de v i c e Pr e s e t s
Device Presets provide a simple way to save and recall settings for an individual Pro64 I/O device. Device
Presets can be used to recall frequently used channel combinations, input channel names, matrix routings,
etc. Note that Device Presets are not available on the MH10/MH10f, RCI, and ASI.
Device Presets are saved as part of a project; you will be prompted to create a project first if you attempt to
create a preset when no project exists.
Device Presets are saved with a project.
A Device Preset stores the following information:
Input and/or Output • Slot range (1‑16, 17‑32, 33‑48, or 49‑64)
• Matrix on/off state
Matrix channel/Slot routing •
Active Input channels assigned to network Slots for AllFrame, 6416i, 6416m, 6416Y2, •
and 6416dio
• Channel names for input devices for AllFrame, 6416i, 6416m, 6416Y2, and 6416dio
Stereo Link status (input devices only) •
6416m and AllFrame • mic preamp parameters: Mute, Gain, Phase, Low Cut, Pad, and
+48V phantom power
Output • channel on/off status for AllFrame, 6416o and 6416dio
P No t e : Since the AllFrame hardware is user‑configurable, it is important to understand that AllFrame
Device Presets are linked to the specific configuration, type, and location of all I/O cards installed
in the device. Moving or changing the quantities of the I/O cards in an AllFrame will cause saved
device presets in a project to become invalid.