User Manual
Table Of Contents
- Welcome
- Features
- Conventions Used in this Document
- Optional Remote Control
- A-16R Master Volume Control
- Package Contents
- About A-Net
- Compatibility with Pro64
- About Category 5
- Cat-5 Cables
- AC Line Conditioning
- Power Supplies
- Cleaning and Maintenance
- Installing the A-16R in a Rack
- Channel Labels
- A-16R Front Panel
- A-16R Rear Panel
- A-16CS Front Panel
- A-16CS Rear Panel
- Monitor System Setup
- Basic Navigation
- Operational Modes
- Global Controls
- Button Behaviors
- Making a Mix
- Creating Groups
- Saving a Preset
- A-16R Rear Panel
- A-16CS Control Surface
- A-16CS Rear Panel
- MIDI
- Applications
- Troubleshooting
- Specifications - A-16R
- Specifications - A-16CS
- A-16CS Mounting Options
- A-16R Block Diagram
- Dimensions
- A-Control Specifications
- MIDI Implementation Chart
- MIDI System Exclusive Implementation
- Warranty Registration
51A-16R Pe R s o n A l Mi x e R A n d A-16Cs Co n t R o l su R f A C e us e R Gu i d e
transmitted as a single data dump.
The A‑16R can receive the following sysex data types:
Single Preset files ‑ saved mix information is loaded into •
the current mix state.
All Preset files ‑ the A‑16R’s current sixteen mix Presets are •
replaced with the data from a set of sixteen saved Presets.
The A‑16R is capable of saving and restoring Presets via MIDI only when the
front panel Re m o t e /lo c a l switch is in the lo c a l position. In the Re m o t e position,
MIDI communication is disabled.
P No t e : The MIDI Thru jack will always echo data appearing at the MIDI In
jack regardless of the position of the Re m o t e /lo c a l switch.
Saving Presets via MIDI
The A‑16R can save Preset information to its internal memory or via MIDI
SysEx any time it is in Save Mode. The A‑16R Save Mode is entered by holding
down the Re c a l l and GR o u p buttons simultaneously. Holding the Re c a l l and
GR o u p button combination flashes the Recall and Group LEDs to indicate that
you can save Presets.
To save a Preset to internal memory, you press a numbered Channel button
to store the current mix at the selected location.
To save a Preset or group of presets via MIDI, the So l o and mu t e buttons are
used in combination with the Re c a l l and GR o u p buttons.
Save One Mix Preset via MIDI
To save the current mix as a Preset via MIDI SysEx:
Recall a Preset (or edit a Preset to create a new mix) 1.
including volume, pan, mutes and groups for up to sixteen
channels of audio as required. Editing can be done from
the front panel of the A‑16R or from the optional A‑16CS.
Set the A‑16R front panel 2. Remote/Local switch to the lo c a l
(MIDI On) position.
Set up your 3. MIDI recording device so that it is ready to
receive MIDI SysEx data.
Hold the 4. Re c a l l and GR o u p buttons down to enter Save
Mode.
While still holding the 5. Re c a l l and GR o u p buttons, press
the So l o button. (After pressing the So l o button, you can
release the Re c a l l and GR o u p buttons.)
The current mix is sent out from the A‑16R to the 6. MIDI