- Aviom, Inc. User Guide Personal Mixer A-16CS, A-16R

Aviom A-16R and A-16CS User Guide

Note: Changes made from the A-16CS will be instantly

reflected on the front panel of the connected A-16R

Personal Mixer. Remember that the R

EMOTE/LOCAL

switch on the A-16R must be in the R

EMOTE position in

order for messages from the A-16CS to be received.

Saving a Mix From the A-16CS

When creating monitor mixes, you can save your work as a Preset

remotely from the A-16CS. The Preset itself is stored in inside the

A-16R, not in the A-16CS. This ensures that the mixes you create are

always available in the device that is controlling the audio. Also, you

can move the A-16CS to another A-16R for remote creation of mixes

and Presets without losing any mix information in the original A-16R.

To Save a mix as a Preset:

• Create your mix by setting volume, pan, mutes, and

groups as desired.

• On the A-16CS hold down the R

ECALL and GROUP

buttons simultaneously.

• While still holding both buttons, press any numbered

Channel button.

• The numbered Channel buttons flash to indicate that

the Preset is stored.

Recalling a Preset From the A-16CS

As mentioned previously, your mixes are stored as Presets inside the

A-16R. You can recall a mix Preset remotely from the A-16CS. Or, if

the A-16CS is not available, the same Presets can be recalled from the

front panel of the A-16R.

To recall a Preset from the A-16CS:

• Press the R

ECALL button.

• The RECALL button will flash.

• Select a numbered button (1 to 16) corresponding to the

Preset mix that you want to recall.

• When the button is pressed, the mix is recalled and is

now available and can be edited if desired.

When a Preset is selected from the remote control, the same numbered

LED on the front panel of the A-16R will flash briefly to indicate that

the preset has been loaded.