User`s manual
E-45
When the power has failed (When all the LED go off with the power ON)
Measurestobetaken
1. Disconnect the power plug from the outlet.
2. Check the following matters and perform the countermeasure properly.
Maintenance
Is the ambient temperature in
excess of 35°C (95°F)?
Are the ventilation vents
blocked?
Are the Air Intake/Ventilation
Slots blocked?
Breakdown of an internal
circuit could be the problem.
Please use the projector in an operation ambient temperature
of 5°C (41°F) to 35°C (95°F).
Rearrange the setup location of the projector and separate the
projector from surrounding objects. See “Do Not Block the air
vents” on Page E-4.
Please request repair at your store of purchase.
Clean the Air Intake/Ventilation Slots
See “Cleaning the Air Intake/Ventilation Slots” on Page E-49.
Downloaded From projector-manual.com Avio Manuals