User`s manual

E-10
A Check of the Supplied Items and the Names of the Parts
Names and Functions of the Parts (Projector)
RemotecontrolIR
sensor
Lenscap
Zoomlever
Turn this to adjust the screen size. See
Page E-24.
Projectionlens
The image is projected
from here.
* Be sure to remove the
lens cap before pro-
jecting.
Focusadjustmentring
Turn this to adjust the focus.
See Page E-24.
Documentcover
The document or printed material to be read is
placed under this cover.
See Page E-33.
Operationpanel
The buttons used for regular
operation are located here. See
Page E-13.
Tiltfoot
This foot is used to adjust the vertical angle of the
projection as well as the left-right balance. Turn-
ing it to the left extends it and turning it to the right
shortens it. See Page E-24.
Exhaustvents
Air is discharged from here.
Lampunitcover
(Underneathprojector)
The projection lamp unit is located inside.
See Page E-46.
Airintake
Air is drawn in from the side.
Inputconnectorpanel
Included are connectors for per-
sonal computer, video, and USB
memory*, etc.
See Page E-12.
Tiltadjustmentlever
Press here to adjust the tilt foot. See Page E-24.
CAUTION
• Duringunitoperation,donotobstructthefrontofthelens.Duringoperation,stronglightthroughthe
lens is projected. Obstruct the front of the lens causes re or burn.
• Duringprojection,besuretoremovethelenscap.Negligencetoobserveitmaydeformthelenscap.
• Whenalampexplodes,itispossiblethatparticlesofglassandothermaterialmaybereleasedout-
side from the ventilation slots; therefore, do not bring your face close to the ventilation slots, or the air
intake.
Downloaded From projector-manual.com Avio Manuals