User's Manual

ASSEMBLY

SEAT

Loosen nut on the seat clamp and add 3 or 4 drops of oil onto the

threads of the bolt. Place the smaller end of the seatpost into the

seat clamp until it stops with the bolt to the rear of the seatpost.

Thread the nut on the seat clamp loosely. Insert the larger end of

the seatpost into the seat tube of the bicycle frame observing the

Minimum Insertion Mark on the seatpost. Position the top surface

of the seat parallel with the ground. The serrations on the seat

clamp must mesh completely with the seat frame serrations, push

the front of the seat up and down to align the serrations. Securely

tighten the seat clamp. Securely tighten the bolts on the seatpost

clamp. If your bicycle is equipped with a quick release, refer to

page 67 for proper adjustment instructions.

WARNING

The seatpost must be inserted so that the

Minimum Insertion Mark cannot be seen.