User guide

Avigilon Control Center System Integration Guide with STENTOFON AlphaCom
8
1. Open the Avigilon Stentofon Gateway configuration application to stop the Gateway
Windows service.
2. Locate your backup copy of the
GatewayParams.xml file.
3. Copy and paste the backup
GatewayParams.xml file into the C:\Program
Files\Avigilon\Avigilon Stentofon Gateway\
folder.
Allow Windows to overwrite the copy that is currently in the folder.
4. Close the Avigilon Stentofon Gateway configuration application to start the Gateway
Windows service.
5. To check if the mapped alarms were restored correctly, open the Avigilon Stentofon
Gateway configuration application again.