n

Avigilon Control Center System Integration Guide with Software House C•Cure 9000
5
Avigilon Configuration
Once the required licence and software have been installed, configure the Avigilon Control
Center for the integration.
See the Avigilon Control Center Client User Guide for more information about each of the
required configurations.
Assigning Logical IDs to Cameras
In the Avigilon Control Center Client software, assign a logical ID to each camera. The C•Cure
9000 software will only detect cameras with a logical ID. By default, cameras do not have a
logical ID.
1. In the Avigilon Control Center Client software, right-click a camera in the System
Explorer and select Setup.
2. In the camera Setup dialog box, click General.
3. In the General settings dialog box, enter a Logical ID for the camera.
The logical ID must be unique number.
The logical ID should have no more than nine digits.
101