n

Avigilon Control Center System Integration Guide with Software House C•Cure 9000

Installation

All C•Cure 9000 services and components must be turned off before the integration can be

installed.

The Avigilon-C•Cure 9000 integration software (

Avigilon CCure Integration.exe) must be

installed on either a server or client that is connected to your C•Cure 9000 system.

NOTE: Integration upgrades can be installed on any machine that was previously running the

integration.

Servers

Install the following on any server in your network.

• C•Cure 9000 server software

• Avigilon Control Center Server software

Client

• Install the C•Cure 9000 client software on any workstation that requires access to the

C•Cure 9000 system.

Checking the License in Avigilon

After you have installed all the required software, check that the Avigilon Third Party Integration

license was properly applied.

1. Open the Avigilon Control Center Admin Tool.

2. Select the Settings tab and click Licensing. The License Activation dialog box

appears.

The dialog box must say Integration Connections: Yes or the software was not properly

licensed.

Checking the License in C•Cure 9000

1. In the C•Cure 9000 Administration Station or the C•Cure 9000 Monitoring Station,

select Help > About.

2. In the About C•Cure 9000 dialog box, select the License tab.

3. In the Options list, check that Avigilon Control Center is listed.