n

8
4. In the Video Server Editor, give the server a name and description.
5. Enter the username and password you created for the integration. See Adding an
Integration User in Avigilon on page 6 for more information.
6. Enter the Avigilon server IP address.
If the integration software was installed on the same server as the Administration
Workstation software, enter the localhost IP address instead (typically 127.0.0.1).
7. Select the Enable check box then click Connect.
8. Click the Import Cameras button when it becomes enabled.
NOTE: Only cameras that have logical IDs are imported into the C•Cure 9000 system. See
Assigning Logical IDs to Cameras on page 5 for more information.
9. Click Save and Close.
The new server and imported cameras are added to the Video Tree pane.
Adding Server Alarms
You can create a server alarm that is triggered by the Avigilon server’s online or offline status.
1. Open the C•Cure 9000 Administration Workstation.
2. In the Video Tree pane, right-click the Avigilon server and select Edit.