Owner's manual

Avigilon Control Center System Integration Guide with S2 NetBox
2
Installation
Server
Install the following on the same network:
1. Install the S2 NetBox.
2. Install the Avigilon Control Center Server software and the Avigilon S2 Gateway
software integration on the same server.
Client
• Install the Avigilon Control Center Client software on the computers that require
access to the Avigilon Control Center System.
Checking the Avigilon License
After you have installed all the required software, check that the Avigilon license was properly
applied.
1. Open the Avigilon Control Center Admin Tool.
2. Select the Settings tab and click Licensing. The License Activation dialog box
appears.
The dialog box must say Integration Connections: Yes or the software was not properly
licensed.