Owner's manual

ManualsBrandsAvigilon ManualsSoftwareS2 NetBox Integration

INT-S2-A-Rev4

Avigilon Control Center System

Integration Guide

with S2 NetBox

Summary of content (9 pages)

PAGE 1
Avigilon Control Center System Integration Guide with S2 NetBox INT-S2-A-Rev4
PAGE 2
Copyright © 2013 Avigilon. All rights reserved. No copying, distribution, publication, modification, or incorporation of this document, in whole or part, is permitted without the express written permission of Avigilon. In the event of any permitted copying, distribution, publication, modification, or incorporation of this document, no changes in or deletion of author attribution, trademark legend, or copyright notice shall be made.
PAGE 3
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 4
Avigilon Control Center System Integration Guide with S2 NetBox Introduction The Avigilon S2 Integration allows the S2 NetBox to utilize Avigilon surveillance technology.
PAGE 5
Avigilon Control Center System Integration Guide with S2 NetBox Installation Server Install the following on the same network: 1. Install the S2 NetBox. 2. Install the Avigilon Control Center Server software and the Avigilon S2 Gateway software integration on the same server. Client • Install the Avigilon Control Center Client software on the computers that require access to the Avigilon Control Center System.
PAGE 6
Avigilon Control Center System Integration Guide with S2 NetBox Configuration Set up the S2 NetBox to receive video streams from the Avigilon Control Center Server. Adding an Integration User in Avigilon To protect the security of the Avigilon Control Center Server, add a user to the Avigilon software specifically for connecting to the integration. See the Avigilon Control Center Client User Guide for details about how to add users.
PAGE 7
Avigilon Control Center System Integration Guide with S2 NetBox Configuring Avigilon Control Center in the S2 NetBox Your S2 NetBox web client should display Setup > Cameras > Configure Avigilon NVR in the Table of Contents. Open the Configure Avigilon NVR page and configure the S2 NetBox to connect with the Avigilon Control Center Server. 1. Enter the IP address to your Avigilon Control Center Server. 2.
PAGE 8
Avigilon Control Center System Integration Guide with S2 NetBox Monitoring Video and Events Now that the integration is complete, use the S2 NetBox software to monitor video and events in your surveillance site. See the S2 SecurityHelp for more information.
PAGE 9
Avigilon Control Center System Integration Guide with S2 NetBox Troubleshooting This section contains solutions to issues that may appear in the Avigilon S2 integration. If the suggested solutions do not resolve your issue, contact Avigilon Support at support@avigilon.com. Video Does Not Synchronize with S2 NetBox Events If you have linked Avigilon cameras with S2 NetBox events, video is not recorded for the configured events.