Avigilon Control Center 5 System Integration Guide with S2 NetBox INT-S2-B-Rev1
© 2012 — 2014 Avigilon Corporation. All rights reserved. Unless expressly granted in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon Corporation or its licensors. AVIGILON, CAPTURE IT WITH CLARITY, HDSM, HIGH DEFINITION STREAM MANAGEMENT (HDSM), THE BEST EVIDENCE and LIGHTCATCHER are unregistered and/or registered trademarks of Avigilon Corporation in Canada and other jurisdictions worldwide.
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Upgrading from Avigilon Control Center 4 . . . . . . . . . . . . . . . 2 Server . . . . . . . . . . . . . . . . . . . . . . . . . . .
Avigilon Control Center 5 System Integration Guide with S2 NetBox Introduction The Avigilon S2 Integration allows the S2 NetBox to utilize Avigilon surveillance technology.
Avigilon Control Center 5 System Integration Guide with S2 NetBox Installation Upgrading from Avigilon Control Center 4 If you are upgrading to this version of the Avigilon S2 integration software, be aware that this version of the integration is only compatible with Avigilon Control Center 5. Avigilon Control Center 5 provides the ability to organize multiple servers into Sites and share settings between servers.
Avigilon Control Center 5 System Integration Guide with S2 NetBox Configuration Set up the S2 NetBox to receive video streams from the Avigilon Control Center Server. Adding an Integration User in Avigilon To protect the security of the Avigilon Control Center Server, add a user to the Avigilon software specifically for connecting to the integration. See the Avigilon Control Center Client User Guide for details about how to add users.
Avigilon Control Center 5 System Integration Guide with S2 NetBox 1. Enter the IP address to your Avigilon Control Center Server. 2. Enter 3010 as the Avigilon Server Port. 3. Enter the Avigilon username and password you created for the integration. See Adding an Integration User in Avigilon on page 3. 4. Click Check connection. You have made a successful connection when the following message appears: This Avigilon NVR can be configured for network controller integration.
Avigilon Control Center 5 System Integration Guide with S2 NetBox This may be caused by a time difference between the S2 NetBox and the server where the integration is installed. The S2 NetBox and the integration server can be running in different time zones, but there can be no more than 5 minutes off from the Coordinated Universal Time (UTC) setting on the S2 NetBox or a communication error occurs.
