Owner manual

Avigilon Control Center System Integration Guide with AMAG Symmetry Security Management System
7
6. Complete the following fields:
a. Description: give the camera a name.
b. Video Recorder: select the server the camera is connected to.
c. Video Channel: select the camera you want to see in the SMS software.
NOTE: Only cameras with logical IDs are listed. For more information, see Assigning Logical
IDs to Cameras on page 5.
d. If you are adding a PTZ camera, enable the relevant PTZ controls.
7. Click Save. Repeat the previous steps until all the required cameras have been added.