User Manual

69
VidProxyUrl The URL used as a translator between the appliance and the
server.
VidProxyImageUrl The URL used to store the video captured by the Avigilon
server.
Installed Check this box to indicate that this server is connected and
working properly.
Cameras The name and UUID of each camera this server accesses, their
current status, whether they are PTZ or not, and their zoom
capability.
Salient Server
Name The names of the video server for this system.
Alt Name The alternative name for this server.
Appliance From the drop-down list, select the appliance to which this
server is connected or with which it is configured. Only those
servers previously defined for this system can appear in this
list.
Hostname Enter the network name, URL, or IP address of this Salient
server. All Salient servers have a fixed address (assigned when
this server was configured) that must be entered here.
Port Enter the port number to which this server is connected on the
appliance.
WebServicePort Enter the port number that this server uses to communicate
with its web service.
Username If required, enter the user name used to access this server.
This user name is automatically entered whenever the server
is accessed.
Password If required, enter the password used to access this server. This
password is automatically entered whenever the server is
accessed.
VidProxyUrl The URL used as a translator between the appliance and the
server.
Installed Check this box to indicate that this server is connected and
working properly.
Milestone Server
Name The names of the video recording devices for this system.
Alt Name The alternative name for this server.
Appliance From the pick list, select the appliance this server is connected
to.
Address The web address defined for this video recording device. Click
on this address to bring up the Milestone Server Edit page for
this device.
Port Enter the Milestone server port through which the Access
Control Manager appliance is communicating.