User Manual

47
The Edit Event screen appears like this example:
4. Make changes to these fields as required.
These fields include:
Name Enter a name for this event.
Return Enter a name for the return-to-normal (RTN) event.
Event Type Select from the drop-down list the event type for this event.
Only those event types current defined for this system appear in this
list.
Source Type Select from the drop-down list the device where this event originates.
Priority Specify the priority of this event. The Alarm Monitor stacks alarms on
the screen
according to their priority. Priority 1 alarms appear at the top of the
screen, priority 2 alarms appear below the priority alarms, and so on.
The priority range is 0 - 99.
Suppress Time From the drop-down list, select the time period during which this
event is not reported.
Only those time periods currently defined for this system appear in
this list.
Instructions Type instructions for handling this event. These instructions will
appear on the operator's panel whenever this event occurs.
Email Enter the email addresses of all those people who should be notified
when this event occurs.
You can enter more than one email address
Return Event Select from the drop-down list the event type for this RTN event.
Only those event types current defined for this system appear in this
list.
Return Priority Enter the priority number of this event.
The priority range is 0 - 99.
Has on/off Check this box to indicate that this event is a toggle, involving an on/
off switch logic.