User Manual

32
6. When you're finished, click .
The EOL Resistance Listing page reappears with the newly defined option listed.
to: Select from the drop-down list the ending value of the inactive
range.
Values range from 100 to 9950 ohms in 50-ohm increments.
Active Range Select from the drop-down list the beginning value of the active
range.
Values range from 100 to 9950 ohms in 50-ohm increments.
to: Select from the drop-down list the ending value of the active range.
Values range from 100 to 9950 ohms in 50-ohm increments.
Advanced EOL Resistance
Priority Select from the drop-down list the priority level for this input point.
The options are Low, Medium, and High.
Status Select from the drop-down list the input state you are defining. The
possible values are:
• Inactive
• Active
• Ground Fault
• Shorted
•Open
• Foreign
• Non-settling
Low range Select from the drop-down list the beginning value of the low range.
High range Select from the drop-down list the beginning value of the high
range.