User Manual

25
Alt Name Identifies an alternate name for the door. If there is an additional
name the door is identified by, enter this alternate name.
Location Identifies the location of the door.Enter a description of the door’s
location.
Appliance Identifies the appliance of the door.This is a display only field when
in edit mode.
Vendor Identifies the vendor of the door.This is a display only field when in
edit mode.
Installed Check this box to indicate that this door is currently connected and
communicating with the panel and appliance.
Partitions From the window, select the partitions to which this door should be
added.
Only those partitions currently defined by the system appear in this
window.
Panel Specifies the panel the door is assigned to. This is a display only
field when editing the hardware (the panel can be changed when
editing the door operations).
APB Mode Indicates the anti-passback mode for the door. Select the APB
Mode from the drop-down list. The available options are:
No Selection – The specified door is not involved in APB at all.
Grants do not take APB into consideration at all.
Soft area APB – The specified door should have an area entering
and area leaving configured for it.
Hard area APB – The specified door should have an area entering
and area leaving configured for it.
Door-based timed APB – The specified door should not have an
area entering or area leaving configured for it. There should be a
timeout value configured for the door (a value entered in the 'APB
Delay' field).
Token-based timed APB – The specified door should not have an
area entering or area leaving configured for it. There should be a
timeout value configured for the door (a value entered in the 'APB
Delay' field).
Timed area APB – The specified door should have an area
entering, area leaving, and timeout configured for it.
APB Delay Specifies the number of seconds before another entry is allowed.
Enter the number of seconds.
Area Entering Identifies the area the user enters when entering through the door.
If no area is specified, any location is valid. Select the area from the
drop-down list. Only those areas currently defined for this system
appear in this list.
Area Leaving Identifies the area the user moves into when exiting the door.
Select the area from the drop-down list.In addition to the Don't
Care option, only those areas currently defined for this system
appear in this list.