Owner's manual

Setup
Figure B. Add Data Volume dialog box
3. To delete a Secondary Data Volume, select the drive and click Delete Data Volume. Deleting a
data volume will erase all recorded data from that drive.
Note: You cannot delete a Primary Data Volume, you can only erase all data. See
Erasing the Storage Configuration for more information.
4. If you are not satisfied with the location of the Primary Data Volume, select the drive you prefer
and click Set Primary Data Volume.
The Primary Data Volume contains the database that indexes the surveillance data.
Note: The drive must have a data volume before it can be set as the Primary Data
Volume.
5. When you are satisfied with the storage configuration, click OK.
Erasing the Storage Configuration
Note: If you choose to erase all stored data, be aware that all recorded surveillance data and server
settings will be lost.
1. Open the Storage dialog box. For more information, see Accessing the Server Storage
Configuration.
2. Click Erase All Data.
3. When the confirmation dialog box appears, click Yes.
4. You will need to create a new storage configuration before you can start up the Control Center
Server again. See Changing the Storage Configuration
for more information.
Configuring the Server Backup Settings
To allow the system to automatically backup recorded video, you must enable it in the Admin Tool and
assign a backup location for the backup files.
27