Owner's manual

Setup
29
Figure A. Storage dialog box
2. To add a data volume, select the drive and click Add Data Volume.
o In the Add Data Volume dialog box, enter the preferred data volume size then click OK.
Figure B. Add Data Volume dialog box
3. If you are not satisfied with the location of the Primary Data Volume, select the drive you prefer to
have the Primary Data Volume on and click Set Primary Data Volume.
The Primary Data Volume contains the database that indexes the surveillance data.
Note: The drive must have a data volume before it can be set as the Primary Data
Volume.
4. When you are satisfied with the storage configuration, click OK.