Owner's manual

Avigilon Control Center Server User Guide
28
Figure A. Set Up Storage Configuration dialog box
Changing the Storage Configuration
You may need to change the storage configuration in the following situations:
 If you are unsatisfied with the suggested storage configuration in the Set Up Storage
Configuration dialog box, click Change Storage Configuration to define the storage settings to
fit your needs.
 If you recently chose to Erase All Data, you must reset the Storage configuration before you may
continue.
Open the Storage dialog box and complete the following procedure:
If the Storage dialog box is not already open, see
Accessing the Server Storage Configuration for more
information.
1. In the Storage dialog box, select the drive you want to store the Config Volume on and click Set
Config Volume.
The Config Volume stores all of the server settings. It is recommended to have the Config
Volume on a separate drive from the Primary Data Volume.