Manual

Video
75
click .
3. In the Preset Name dialog
box, enter a name for the
preset and click OK.
To activate a PTZ preset
Select a preset and click .
To return to the Home
preset position
If the PTZ camera supports a Home
preset position, the button is
enabled. Click the button to return
the camera to its Home position.
To program a PTZ pattern
1. In the PTZ Controls pane,
select a pattern number and
click .
2. Use the PTZ controls to move
the camera and create the
pattern.
3. Click .
To activate a PTZ pattern
In the PTZ Controls pane, select a
pattern number and click .
The pattern will repeat until the
pattern is stopped or another pattern
is run.
To activate a PTZ tour
In the PTZ Controls pane, select a
tour number and click .
The tour will repeat until stopped or
until other PTZ controls are used.
To program a PTZ tour, see
Programming PTZ Tours
.
To activate an auxiliary
command
1. Select an aux command
number and click .
2. Click to turn off the
auxiliary output.
To display the PTZ camera
onscreen menu
1. Click the Menu button.