Installation guide

1. If available, adjust the zoom using the appropriate ring on the lens.
2. If the lens has an auto focus (AF) mode, set the lens switch to the AF position to allow the camera web
interface or Avigilon Camera Installation Tool to control the camera’s focus.
a. In the Image and Display settings page, use the Auto Focus button to focus the lens.
If the desired focus position was not achieved, use the focus near and far buttons to adjust the
focus.
(Optional) Configuring Onboard Storage
To use the camera’s onboard storage feature, you must insert an SD card into the SD card slot.
It is recommended that the SD card have a capacity of 64 GB or more, and a write speed of class 10 or better. If
the SD card does not meet the recommended capacity or write speed, the performance of the onboard storage
may suffer and result in the loss of frames or footage.
Ensure the SD card is designed for continuous video recording or the SD card life expectancy may be adversely
affected.
1. Insert an SD card into the camera.
CAUTION — Do not force the SD card into the camera or you may damage the card and the
camera. The SD card can only be inserted in the orientation shown on the camera.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see the
Avigilon High Definition H.264 Camera Web Interface User Guide.
For More Information
Additional information about setting up and using the device is available in the following guides:
l Avigilon™ Control Center Client User Guide
l Avigilon™ High Definition H.264 Web Interface User Guide
The manuals are available on the Avigilon website: http://avigilon.com/support-and-downloads
(Optional) Configuring Onboard Storage 7