Operating instructions

EXP5000 Buttons and Knobs
600-00142-000 Rev 01 -21- Entegra EXP5000 PFD
VSI Bug set value. The VSI Bug displays on the VSI Indicator.
The VSI Bug range is ±1,600 fpm, which is the maximum vertical
speed allowed by the S-TEC 55X autopilot.
6) Barometric Correction Setting (Baro Set)—Controlled by the
right knob when you select Baro Set, the value indicates the
current barometric correction setting. The baro correction may
display as inches of mercury (Hg), millibars (Mb), or hectopascals
(Hp). Barometric units are set during EXP5000 installation. The
range of allowable values is 27.50” to 31.50” (931 mb/HPa - 1067
mb/HPa). The value appears in the button label and in the
Barometric Correction Setting window.
7) Right Knob—Once you enable one of the setting buttons, you
can either rotate or push the knob:
■ Rotate—Allows you to change the desired setting one
number at a time.
■ Push:
◆ Hdg Bug, Alt Bug, and VSI Bug—Syncs the setting to
the current heading or vertical speed. After pushing the
knob, you can then rotate it to easily make small
adjustments to your heading and speed.
◆ Baro Set—Sets the barometric correction to the
international standard setting of 29.92” (1012 hPA/mb).
Table 2.5 summarizes the right knob settings:
Table 2.5 Right Knob Settings
Active Button Knob Label Rotary Action Push Action
Hdg Bug Sets Heading Bug Syncs Heading Bug
to current magnetic
heading.
Alt Bug Sets Altitude Bug Syncs Altitude Bug
to nearest 100’.
VSI Bug Sets VSI Heading
Bug
Syncs VSI Bug to
nearest 50 fpm.
Baro Set Sets Baro Sets Baro to 29.92.