Operating instructions

EXP5000 Buttons and Knobs

600-00142-000 Rev 01 -19- Entegra EXP5000 PFD

Right Buttons and Knob

After you press a button to enable it, use the right knob to change the

target settings for that Bug (or setting). The knob label displays the

current functionality, as shown in Table 2.5 on page 21.

Figure 6. Right Buttons and Knob

1) Brightness Control (BRT/DIM)—Allows you to adjust the

display brightness. Press the top button to brighten the display;

press the bottom button to dim it.

Note: The Hdg Bug button is re-enabled ten seconds after you last push or

rotate the knob to set the

Alt Bug, VSI Bug, or Baro Set buttons. Avidyne

recommends that you always select the desired button just before you use

the knob.